Immo Tool With Keygen [CRACKED]

Immo Tool With Keygen: A Software Kit for Repairing and Coding ECUs and Immobilisers

Immo Tool is a software kit that enables the repair and coding of engine ECUs and immobilisers. It is designed to simplify and automate the process of matching and programming second hand engine ECUs and immobilisers, making it possible to reuse them. Immo Tool is a set of solutions gathered together in one big software application.

In this article, we will show you how to download, install and activate Immo Tool with keygen, as well as how it works and what you need to start working with it.

How to Download, Install and Activate Immo Tool With Keygen

To download Immo Tool with keygen, you can use the link below:

Immo Tool 26.12.07 Download & Activation Service

Note: This link is for reference only. We do not guarantee the safety or legality of the software. Use it at your own risk.

After downloading and extracting the files, you will see the following files:

GETID2.exe

Immo_Tool_26.12.07 folder

License key folder (name with your name)

To install and activate Immo Tool with keygen, follow these steps:

Run GETID2.exe. You will get your HWID (hardware ID).

Send your HWID to the email address carautorepair01@gmail.com. You will receive the license key files from them.

Open the license key folder (name with your name). You will see the following files:

Mirosoft.key

Mirosoft.reg

Mirosoft.txt

Copy all these files to the Immo_Tool_26.12.07 folder.

Run Immo Tool.exe. It will prompt that the software has been registered. Click OK.

Now you can use Immo Tool with keygen.

How Immo Tool Works

Immo Tool works on files, so you need several programmers to read and write the devices you work with. Working with the software involves:

Choosing the car type and ECU type (this involves coding algorithm of the immo entries)

Loading the right file

Starting the program

Saving the modified file or loading the decoded PIN or VIN codes

Programming the target system with the modified file

A file that has been properly modified and loaded to ECU memory makes it possible to activate a second hand ECU to start in a new environment / new car. It can be assumed (with just a few exceptions) that the modified ECU will work just like its brand new equivalent â ready for coding / self coding. In some cases, the new ECU will work without the coding function, enabling you to test the car engine with a damaged immo device or even without any immo devices.

What You Need to Start Work With Immo Tool

The software works on files and reading of the memory contents is your problem. Sometimes it is possible via diagnosis but in most cases you would have to take the ECU out of the car and read the contents of the memory. In our opinion, you need:

A universal programmer able to read / write Eprom and flash memories

A universal programmer able to read / write serial memories (SPI, I2C, uWire)

Several Motorola programmers (HC 908, 912, 05, 11 â)

Texas Instruments Microcontroller programmers (TMS370, TMS374)

Other programmers (strange hybrid from Opel, Fiat â)

A tool that can read the contents of ECU via diagnosis line would be of a great advantage 061ffe29dd