SP Flash Tool Exe V3.1248.0.96-MT6589.rar

How to Flash MediaTek Devices with SP Flash Tool exe v3.1248.0.96-MT6589.rar

If you have a device powered by MediaTek chipset, such as a smartphone or tablet, you may want to flash or install the stock firmware ROM (scatter-based) on it to update the software or fix any issues. One of the best tools for this purpose is SP Flash Tool, also known as Smart Phone Flash Tool, which is an application that allows you to flash MediaTek devices easily and safely.

In this article, we will show you how to download and use SP Flash Tool exe v3.1248.0.96-MT6589.rar, which is a specific version of the tool that supports devices with MT6589 chipset. This version of SP Flash Tool is compatible with Windows and Linux operating systems, and it has some features such as flash stock ROM, flash recovery, memory test, parameter setting, format device/hard reset, and more.

Download SP Flash Tool exe v3.1248.0.96-MT6589.rar

The first step to flash your MediaTek device with SP Flash Tool is to download the tool from a reliable source. You can download SP Flash Tool exe v3.1248.0.96-MT6589.rar from the links below[^1^] [^2^]:

For Windows: https://androidmtk.com/download-sp-flash-tool-v3-1248

For Linux: https://spflashtool.com/download/

After downloading the tool, extract the zip file and run the executable file to launch the tool.

Prepare Your Device and Firmware

Before you flash your device with SP Flash Tool, you need to prepare some things:

Make sure your device is powered off and has at least 50% battery level.

Make sure you have installed the correct USB drivers for your device on your computer.

Make sure you have backed up all your important data on your device, as flashing will erase everything.

Make sure you have downloaded the correct firmware file for your device model and chipset. The firmware file should be in .txt-based scatter format, which can be found in various online sources or extracted from your device using tools like MTK Droid Tools.

Flash Your Device with SP Flash Tool

Once you have everything ready, you can proceed to flash your device with SP Flash Tool by following these steps:

Connect your device to your computer using a USB cable.

Launch SP Flash Tool on your computer and click on the \"Scatter-loading\" button.

Browse and select the scatter file from the firmware folder that you have downloaded or extracted.

The tool will load all the partitions of the firmware and display them on the screen.

Select the partitions that you want to flash by checking or unchecking the boxes next to them.

If you want to flash only certain partitions, such as recovery or boot, make sure you uncheck \"Preloader\" as flashing it may brick your device.

If you want to flash the whole firmware, you can leave everything checked.

Click on the \"Download\" button at the top of the tool.

The tool will start flashing your device and show a progress bar at the bottom of the screen.

Wait until the flashing process is completed and a green tick mark appears on the screen.

Disconnect your device from your computer and reboot it.

Congratulations! You have successfully flashed your MediaTek device with SP Flash Tool exe v3.1248.0.96-MT6589.rar. 061ffe29dd